ACIL FM

Nama	Ukuran	Aksi
perl.pod	16.28 MB	View DL Edit
perl56delta.pod	104.69 MB	View DL Edit
perl58delta.pod	112.47 MB	View DL Edit
perl561delta.pod	121.79 MB	View DL Edit
perl581delta.pod	37.17 MB	View DL Edit
perl582delta.pod	4.37 MB	View DL Edit
perl583delta.pod	6.19 MB	View DL Edit
perl584delta.pod	7.19 MB	View DL Edit
perl585delta.pod	5.75 MB	View DL Edit
perl586delta.pod	4.54 MB	View DL Edit
perl587delta.pod	8.16 MB	View DL Edit
perl588delta.pod	24.69 MB	View DL Edit
perl589delta.pod	52.64 MB	View DL Edit
perl5004delta.pod	54.92 MB	View DL Edit
perl5005delta.pod	33.48 MB	View DL Edit
perl5100delta.pod	54.23 MB	View DL Edit
perl5101delta.pod	42.86 MB	View DL Edit
perl5120delta.pod	87.18 MB	View DL Edit
perl5121delta.pod	9.9 MB	View DL Edit
perl5122delta.pod	9.38 MB	View DL Edit
perl5123delta.pod	4 MB	View DL Edit
perl5124delta.pod	3.59 MB	View DL Edit
perl5125delta.pod	7.5 MB	View DL Edit
perl5140delta.pod	140.94 MB	View DL Edit
perl5141delta.pod	7.78 MB	View DL Edit
perl5142delta.pod	6.73 MB	View DL Edit
perl5143delta.pod	7.58 MB	View DL Edit
perl5144delta.pod	6.18 MB	View DL Edit
perl5160delta.pod	130.52 MB	View DL Edit
perl5161delta.pod	6 MB	View DL Edit
perl5162delta.pod	3.51 MB	View DL Edit
perl5163delta.pod	3.99 MB	View DL Edit
perl5180delta.pod	116.63 MB	View DL Edit
perl5181delta.pod	6.44 MB	View DL Edit
perl5182delta.pod	5.21 MB	View DL Edit
perl5184delta.pod	4.53 MB	View DL Edit
perl5200delta.pod	112.99 MB	View DL Edit
perl5201delta.pod	10.64 MB	View DL Edit
perl5202delta.pod	12.22 MB	View DL Edit
perl5203delta.pod	9.17 MB	View DL Edit
perl5220delta.pod	127.89 MB	View DL Edit
perl5221delta.pod	10.51 MB	View DL Edit
perl5222delta.pod	12.33 MB	View DL Edit
perl5223delta.pod	8.26 MB	View DL Edit
perl5224delta.pod	4.36 MB	View DL Edit
perl5240delta.pod	63.4 MB	View DL Edit
perl5241delta.pod	8.02 MB	View DL Edit
perl5242delta.pod	4.02 MB	View DL Edit
perl5243delta.pod	11.16 MB	View DL Edit
perl5244delta.pod	4.4 MB	View DL Edit
perl5260delta.pod	99.45 MB	View DL Edit
perl5261delta.pod	7.74 MB	View DL Edit
perl5262delta.pod	7.7 MB	View DL Edit
perl5263delta.pod	6.9 MB	View DL Edit
perl5280delta.pod	70.42 MB	View DL Edit
perl5281delta.pod	4.53 MB	View DL Edit
perl5282delta.pod	6.05 MB	View DL Edit
perl5283delta.pod	4.99 MB	View DL Edit
perl5300delta.pod	40.31 MB	View DL Edit
perl5301delta.pod	5.6 MB	View DL Edit
perl5302delta.pod	4.57 MB	View DL Edit
perl5303delta.pod	4.86 MB	View DL Edit
perl5320delta.pod	53.32 MB	View DL Edit
perl5321delta.pod	6.84 MB	View DL Edit
perlaix.pod	19.96 MB	View DL Edit
perlamiga.pod	5.61 MB	View DL Edit
perlandroid.pod	8.03 MB	View DL Edit
perlapi.pod	481.55 MB	View DL Edit
perlapio.pod	20.84 MB	View DL Edit
perlartistic.pod	6.85 MB	View DL Edit
perlbook.pod	8.19 MB	View DL Edit
perlboot.pod	294 B	View DL Edit
perlbot.pod	304 B	View DL Edit
perlbs2000.pod	7.81 MB	View DL Edit
perlcall.pod	55.41 MB	View DL Edit
perlcheat.pod	4.38 MB	View DL Edit
perlclib.pod	9.38 MB	View DL Edit
perlcn.pod	4.65 MB	View DL Edit
perlcommunity.pod	6.82 MB	View DL Edit
perlcygwin.pod	26.56 MB	View DL Edit
perldata.pod	48.62 MB	View DL Edit
perldbmfilter.pod	4.86 MB	View DL Edit
perldebguts.pod	41.34 MB	View DL Edit
perldebtut.pod	21.63 MB	View DL Edit
perldebug.pod	38.46 MB	View DL Edit
perldelta.pod	6.84 MB	View DL Edit
perldeprecation.pod	20.34 MB	View DL Edit
perldiag.pod	290.03 MB	View DL Edit
perldos.pod	10.28 MB	View DL Edit
perldsc.pod	25.01 MB	View DL Edit
perldtrace.pod	7.77 MB	View DL Edit
perlebcdic.pod	82.37 MB	View DL Edit
perlembed.pod	36.69 MB	View DL Edit
perlexperiment.pod	7.06 MB	View DL Edit
perlfork.pod	13.04 MB	View DL Edit
perlform.pod	16.22 MB	View DL Edit
perlfreebsd.pod	1.58 MB	View DL Edit
perlfunc.pod	394.31 MB	View DL Edit
perlgit.pod	28.9 MB	View DL Edit
perlgov.pod	14.14 MB	View DL Edit
perlgpl.pod	13.49 MB	View DL Edit
perlguts.pod	158.3 MB	View DL Edit
perlhack.pod	42.15 MB	View DL Edit
perlhacktips.pod	56.34 MB	View DL Edit
perlhacktut.pod	6.01 MB	View DL Edit
perlhaiku.pod	1.47 MB	View DL Edit
perlhist.pod	54.85 MB	View DL Edit
perlhpux.pod	29.89 MB	View DL Edit
perlhurd.pod	1.95 MB	View DL Edit
perlintern.pod	81.61 MB	View DL Edit
perlinterp.pod	32.92 MB	View DL Edit
perlintro.pod	21.62 MB	View DL Edit
perliol.pod	33.99 MB	View DL Edit
perlipc.pod	69.85 MB	View DL Edit
perlirix.pod	4.31 MB	View DL Edit
perljp.pod	8.23 MB	View DL Edit
perlko.pod	11.92 MB	View DL Edit
perllexwarn.pod	355 B	View DL Edit
perllinux.pod	1.96 MB	View DL Edit
perllocale.pod	72.38 MB	View DL Edit
perllol.pod	9.36 MB	View DL Edit
perlmacos.pod	998 B	View DL Edit
perlmacosx.pod	11.84 MB	View DL Edit
perlmod.pod	25.58 MB	View DL Edit
perlmodinstall.pod	10.02 MB	View DL Edit
perlmodlib.pod	74.56 MB	View DL Edit
perlmodstyle.pod	22.06 MB	View DL Edit
perlmroapi.pod	3.2 MB	View DL Edit
perlnetware.pod	6.49 MB	View DL Edit
perlnewmod.pod	10.78 MB	View DL Edit
perlnumber.pod	8.16 MB	View DL Edit
perlobj.pod	34.88 MB	View DL Edit
perlootut.pod	26.13 MB	View DL Edit
perlop.pod	145.4 MB	View DL Edit
perlopenbsd.pod	1.2 MB	View DL Edit
perlopentut.pod	14.87 MB	View DL Edit
perlos2.pod	91.16 MB	View DL Edit
perlos390.pod	16.14 MB	View DL Edit
perlos400.pod	4.65 MB	View DL Edit
perlpacktut.pod	50.17 MB	View DL Edit
perlperf.pod	48.71 MB	View DL Edit
perlplan9.pod	5 MB	View DL Edit
perlpod.pod	22.54 MB	View DL Edit
perlpodspec.pod	67.02 MB	View DL Edit
perlpolicy.pod	25.94 MB	View DL Edit
perlport.pod	86.61 MB	View DL Edit
perlpragma.pod	5.05 MB	View DL Edit
perlqnx.pod	6.52 MB	View DL Edit
perlre.pod	127.75 MB	View DL Edit
perlreapi.pod	29.54 MB	View DL Edit
perlrebackslash.pod	31.53 MB	View DL Edit
perlrecharclass.pod	48.54 MB	View DL Edit
perlref.pod	34.6 MB	View DL Edit
perlreftut.pod	18.38 MB	View DL Edit
perlreguts.pod	38.38 MB	View DL Edit
perlrepository.pod	509 B	View DL Edit
perlrequick.pod	18.69 MB	View DL Edit
perlreref.pod	15.22 MB	View DL Edit
perlretut.pod	119.66 MB	View DL Edit
perlriscos.pod	1.49 MB	View DL Edit
perlrun.pod	54.67 MB	View DL Edit
perlsec.pod	26.95 MB	View DL Edit
perlsecpolicy.pod	18.99 MB	View DL Edit
perlsolaris.pod	29.14 MB	View DL Edit
perlsource.pod	6.96 MB	View DL Edit
perlstyle.pod	8.53 MB	View DL Edit
perlsub.pod	72.66 MB	View DL Edit
perlsymbian.pod	14.98 MB	View DL Edit
perlsyn.pod	44.08 MB	View DL Edit
perlsynology.pod	7.77 MB	View DL Edit
perlthrtut.pod	45.43 MB	View DL Edit
perltie.pod	38.39 MB	View DL Edit
perltoc.pod	685.35 MB	View DL Edit
perltodo.pod	372 B	View DL Edit
perltooc.pod	294 B	View DL Edit
perltoot.pod	294 B	View DL Edit
perltrap.pod	10.37 MB	View DL Edit
perltru64.pod	8.29 MB	View DL Edit
perltw.pod	4.36 MB	View DL Edit
perlunicode.pod	89.21 MB	View DL Edit
perlunicook.pod	25.06 MB	View DL Edit
perlunifaq.pod	13.32 MB	View DL Edit
perluniintro.pod	37.74 MB	View DL Edit
perluniprops.pod	431.26 MB	View DL Edit
perlunitut.pod	7.76 MB	View DL Edit
perlutil.pod	7.12 MB	View DL Edit
perlvar.pod	80.64 MB	View DL Edit
perlvms.pod	49.63 MB	View DL Edit
perlvos.pod	3.75 MB	View DL Edit
perlwin32.pod	39.37 MB	View DL Edit

Edit file: /usr/share/perl5/pod/perlopentut.pod

=encoding utf8

=head1 NAME

perlopentut - simple recipes for opening files and pipes in Perl

=head1 DESCRIPTION

Whenever you do I/O on a file in Perl, you do so through what in Perl is
called a B<filehandle>.  A filehandle is an internal name for an external
file.  It is the job of the C<open> function to make the association
between the internal name and the external name, and it is the job
of the C<close> function to break that association.

For your convenience, Perl sets up a few special filehandles that are
already open when you run.  These include C<STDIN>, C<STDOUT>, C<STDERR>,
and C<ARGV>.  Since those are pre-opened, you can use them right away
without having to go to the trouble of opening them yourself:

print STDERR "This is a debugging message.\n";

print STDOUT "Please enter something: ";
    $response = <STDIN> // die "how come no input?";
    print STDOUT "Thank you!\n";

while (<ARGV>) { ... }

As you see from those examples, C<STDOUT> and C<STDERR> are output
handles, and C<STDIN> and C<ARGV> are input handles.  They are
in all capital letters because they are reserved to Perl, much
like the C<@ARGV> array and the C<%ENV> hash are.  Their external
associations were set up by your shell.

You will need to open every other filehandle on your own. Although there
are many variants, the most common way to call Perl's open() function
is with three arguments and one return value:

C<    I<OK> = open(I<HANDLE>, I<MODE>, I<PATHNAME>)>

Where:

=over

=item I<OK>

will be some defined value if the open succeeds, but
C<undef> if it fails;

=item I<HANDLE>

should be an undefined scalar variable to be filled in by the
C<open> function if it succeeds;

=item I<MODE>

is the access mode and the encoding format to open the file with;

=item I<PATHNAME>

is the external name of the file you want opened.

=back

Most of the complexity of the C<open> function lies in the many
possible values that the I<MODE> parameter can take on.

One last thing before we show you how to open files: opening
files does not (usually) automatically lock them in Perl.  See
L<perlfaq5> for how to lock.

=head1 Opening Text Files

=head2 Opening Text Files for Reading

If you want to read from a text file, first open it in
read-only mode like this:

my $filename = "/some/path/to/a/textfile/goes/here";
    my $encoding = ":encoding(UTF-8)";
    my $handle   = undef;     # this will be filled in on success

open($handle, "< $encoding", $filename)
        || die "$0: can't open $filename for reading: $!";

As with the shell, in Perl the C<< "<" >> is used to open the file in
read-only mode.  If it succeeds, Perl allocates a brand new filehandle for
you and fills in your previously undefined C<$handle> argument with a
reference to that handle.

Now you may use functions like C<readline>, C<read>, C<getc>, and
C<sysread> on that handle.  Probably the most common input function
is the one that looks like an operator:

$line = readline($handle);
    $line = <$handle>;          # same thing

Because the C<readline> function returns C<undef> at end of file or
upon error, you will sometimes see it used this way:

$line = <$handle>;
    if (defined $line) {
        # do something with $line
    }
    else {
        # $line is not valid, so skip it
    }

You can also just quickly C<die> on an undefined value this way:

$line = <$handle> // die "no input found";

However, if hitting EOF is an expected and normal event, you do not want to
exit simply because you have run out of input.  Instead, you probably just want
to exit an input loop.  You can then test to see if an actual error has caused
the loop to terminate, and act accordingly:

while (<$handle>) {
        # do something with data in $_
    }
    if ($!) {
        die "unexpected error while reading from $filename: $!";
    }

B<A Note on Encodings>: Having to specify the text encoding every time
might seem a bit of a bother.  To set up a default encoding for C<open> so
that you don't have to supply it each time, you can use the C<open> pragma:

use open qw< :encoding(UTF-8) >;

Once you've done that, you can safely omit the encoding part of the
open mode:

open($handle, "<", $filename)
        || die "$0: can't open $filename for reading: $!";

But never use the bare C<< "<" >> without having set up a default encoding
first.  Otherwise, Perl cannot know which of the many, many, many possible
flavors of text file you have, and Perl will have no idea how to correctly
map the data in your file into actual characters it can work with.  Other
common encoding formats including C<"ASCII">, C<"ISO-8859-1">,
C<"ISO-8859-15">, C<"Windows-1252">, C<"MacRoman">, and even C<"UTF-16LE">.
See L<perlunitut> for more about encodings.

=head2 Opening Text Files for Writing

When you want to write to a file, you first have to decide what to do about
any existing contents of that file.  You have two basic choices here: to
preserve or to clobber.

If you want to preserve any existing contents, then you want to open the file
in append mode.  As in the shell, in Perl you use C<<< ">>" >>> to open an
existing file in append mode.  C<<< ">>" >>> creates the file if it does not
already exist.

my $handle   = undef;
    my $filename = "/some/path/to/a/textfile/goes/here";
    my $encoding = ":encoding(UTF-8)";

open($handle, ">> $encoding", $filename)
        || die "$0: can't open $filename for appending: $!";

Now you can write to that filehandle using any of C<print>, C<printf>,
C<say>, C<write>, or C<syswrite>.

As noted above, if the file does not already exist, then the append-mode open
will create it for you.  But if the file does already exist, its contents are
safe from harm because you will be adding your new text past the end of the
old text.

On the other hand, sometimes you want to clobber whatever might already be
there.  To empty out a file before you start writing to it, you can open it
in write-only mode:

my $handle   = undef;
    my $filename = "/some/path/to/a/textfile/goes/here";
    my $encoding = ":encoding(UTF-8)";

open($handle, "> $encoding", $filename)
        || die "$0: can't open $filename in write-open mode: $!";

Here again Perl works just like the shell in that the C<< ">" >> clobbers
an existing file.

As with the append mode, when you open a file in write-only mode,
you can now write to that filehandle using any of C<print>, C<printf>,
C<say>, C<write>, or C<syswrite>.

What about read-write mode?  You should probably pretend it doesn't exist,
because opening text files in read-write mode is unlikely to do what you
would like.  See L<perlfaq5> for details.

=head1 Opening Binary Files

If the file to be opened contains binary data instead of text characters,
then the C<MODE> argument to C<open> is a little different.  Instead of
specifying the encoding, you tell Perl that your data are in raw bytes.

my $filename = "/some/path/to/a/binary/file/goes/here";
    my $encoding = ":raw :bytes"
    my $handle   = undef;     # this will be filled in on success

And then open as before, choosing C<<< "<" >>>, C<<< ">>" >>>, or
C<<< ">" >>> as needed:

open($handle, "< $encoding", $filename)
        || die "$0: can't open $filename for reading: $!";

open($handle, ">> $encoding", $filename)
        || die "$0: can't open $filename for appending: $!";

open($handle, "> $encoding", $filename)
        || die "$0: can't open $filename in write-open mode: $!";

Alternately, you can change to binary mode on an existing handle this way:

binmode($handle)    || die "cannot binmode handle";

This is especially handy for the handles that Perl has already opened for you.

binmode(STDIN)      || die "cannot binmode STDIN";
    binmode(STDOUT)     || die "cannot binmode STDOUT";

You can also pass C<binmode> an explicit encoding to change it on the fly.
This isn't exactly "binary" mode, but we still use C<binmode> to do it:

binmode(STDIN,  ":encoding(MacRoman)") || die "cannot binmode STDIN";
  binmode(STDOUT, ":encoding(UTF-8)")    || die "cannot binmode STDOUT";

Once you have your binary file properly opened in the right mode, you can
use all the same Perl I/O functions as you used on text files.  However,
you may wish to use the fixed-size C<read> instead of the variable-sized
C<readline> for your input.

Here's an example of how to copy a binary file:

my $BUFSIZ   = 64 * (2 ** 10);
    my $name_in  = "/some/input/file";
    my $name_out = "/some/output/flie";

my($in_fh, $out_fh, $buffer);

open($in_fh,  "<", $name_in)
        || die "$0: cannot open $name_in for reading: $!";
    open($out_fh, ">", $name_out)
        || die "$0: cannot open $name_out for writing: $!";

for my $fh ($in_fh, $out_fh)  {
        binmode($fh)               || die "binmode failed";
    }

while (read($in_fh, $buffer, $BUFSIZ)) {
        unless (print $out_fh $buffer) {
            die "couldn't write to $name_out: $!";
        }
    }

close($in_fh)       || die "couldn't close $name_in: $!";
    close($out_fh)      || die "couldn't close $name_out: $!";

=head1 Opening Pipes

Perl also lets you open a filehandle into an external program or shell
command rather than into a file. You can do this in order to pass data
from your Perl program to an external command for further processing, or
to receive data from another program for your own Perl program to
process.

Filehandles into commands are also known as I<pipes>, since they work on
similar inter-process communication principles as Unix pipelines. Such a
filehandle has an active program instead of a static file on its
external end, but in every other sense it works just like a more typical
file-based filehandle, with all the techniques discussed earlier in this
article just as applicable.

As such, you open a pipe using the same C<open> call that you use for
opening files, setting the second (C<MODE>) argument to special
characters that indicate either an input or an output pipe. Use C<"-|"> for a
filehandle that will let your Perl program read data from an external
program, and C<"|-"> for a filehandle that will send data to that
program instead.

=head2 Opening a pipe for reading

Let's say you'd like your Perl program to process data stored in a nearby
directory called C<unsorted>, which contains a number of textfiles.
You'd also like your program to sort all the contents from these files
into a single, alphabetically sorted list of unique lines before it
starts processing them.

You could do this through opening an ordinary filehandle into each of
those files, gradually building up an in-memory array of all the file
contents you load this way, and finally sorting and filtering that array
when you've run out of files to load. I<Or>, you could offload all that
merging and sorting into your operating system's own C<sort> command by
opening a pipe directly into its output, and get to work that much
faster.

Here's how that might look:

open(my $sort_fh, '-|', 'sort -u unsorted/*.txt')
        or die "Couldn't open a pipe into sort: $!";

# And right away, we can start reading sorted lines:
    while (my $line = <$sort_fh>) {
        #
        # ... Do something interesting with each $line here ...
        #
    }

The second argument to C<open>, C<"-|">, makes it a read-pipe into a
separate program, rather than an ordinary filehandle into a file.

Note that the third argument to C<open> is a string containing the
program name (C<sort>) plus all its arguments: in this case, C<-u> to
specify unqiue sort, and then a fileglob specifying the files to sort.
The resulting filehandle C<$sort_fh> works just like a read-only (C<<
"<" >>) filehandle, and your program can subsequently read data
from it as if it were opened onto an ordinary, single file.

=head2 Opening a pipe for writing

Continuing the previous example, let's say that your program has
completed its processing, and the results sit in an array called
C<@processed>. You want to print these lines to a file called
C<numbered.txt> with a neatly formatted column of line-numbers.

Certainly you could write your own code to do this — or, once again,
you could kick that work over to another program. In this case, C<cat>,
running with its own C<-n> option to activate line numbering, should do
the trick:

open(my $cat_fh, '|-', 'cat -n > numbered.txt')
        or die "Couldn't open a pipe into cat: $!";

for my $line (@processed) {
        print $cat_fh $line;
    }

Here, we use a second C<open> argument of C<"|-">, signifying that the
filehandle assigned to C<$cat_fh> should be a write-pipe. We can then
use it just as we would a write-only ordinary filehandle, including the
basic function of C<print>-ing data to it.

Note that the third argument, specifying the command that we wish to
pipe to, sets up C<cat> to redirect its output via that C<< ">" >>
symbol into the file C<numbered.txt>. This can start to look a little
tricky, because that same symbol would have meant something
entirely different had it showed it in the second argument to C<open>!
But here in the third argument, it's simply part of the shell command that
Perl will open the pipe into, and Perl itself doesn't invest any special
meaning to it.

=head2 Expressing the command as a list

For opening pipes, Perl offers the option to call C<open> with a list
comprising the desired command and all its own arguments as separate
elements, rather than combining them into a single string as in the
examples above. For instance, we could have phrased the C<open> call in
the first example like this:

open(my $sort_fh, '-|', 'sort', '-u', glob('unsorted/*.txt'))
        or die "Couldn't open a pipe into sort: $!";

When you call C<open> this way, Perl invokes the given command directly,
bypassing the shell. As such, the shell won't try to interpret any
special characters within the command's argument list, which might
overwise have unwanted effects. This can make for safer, less
error-prone C<open> calls, useful in cases such as passing in variables
as arguments, or even just referring to filenames with spaces in them.

However, when you I<do> want to pass a meaningful metacharacter to the
shell, such with the C<"*"> inside that final C<unsorted/*.txt> argument
here, you can't use this alternate syntax. In this case, we have worked
around it via Perl's handy C<glob> built-in function, which evaluates
its argument into a list of filenames — and we can safely pass that
resulting list right into C<open>, as shown above.

Note also that representing piped-command arguments in list form like
this doesn't work on every platform. It will work on any Unix-based OS
that provides a real C<fork> function (e.g. macOS or Linux), as well as
on Windows when running Perl 5.22 or later.

=head1 SEE ALSO

The full documentation for L<C<open>|perlfunc/open FILEHANDLE,MODE,EXPR>
provides a thorough reference to this function, beyond the best-practice
basics covered here.

=head1 AUTHOR and COPYRIGHT

This documentation is free; you can redistribute it and/or modify it under
the same terms as Perl itself.

Batal